Fixture Installation
Services list
Fixture installation in New Braunfels for a dripping faucet, a running toilet, or a shower valve
Call (830) 354-6610 if a faucet keeps dripping, a toilet will not stop filling, or a shower valve no longer holds a temperature.
A New Braunfels plumber gets this call for a drip that will not quit or a toilet that runs all night. Fixture installation in New Braunfels covers new faucets, toilets, and sinks, and fixture repair covers the drips and running valves that show up first. New Braunfels Plumbing Experts checks the stops, the drain, and the valve body before we set new trim, because a pretty handle will not seal a worn cartridge. A plumber in this town also sees mineral film on aerators and shower heads, so we clean or replace those parts when they are part of the complaint.
Later homes in Oak Run and Veramendi often have builder valves that are just now wearing out. Older cottages near Main Plaza may still have old stops that seize when you turn them. We treat those as two different starting points, not as the same kitchen.
Why Choose us
Reasons why you should choose us
On time every time
Clear repair options
Respect for your home
Trained plumbers
The faucet, toilet, and shower jobs we handle
These are the fixture jobs we handle in kitchens and baths. If a supply line has burst under the sink, that visit is also pipe repair or emergency plumbing.
Faucet work, from a drip to a new fixture
Faucet repair starts with the drip or the loose handle and usually ends with a cartridge, a seat, or a new aerator. Faucet installation is the visit when the body is done or you want a new fixture at a sink that is already sound. We shut the stops, protect the cabinet, and check both hot and cold after the new faucet is set.
Toilet work, from a running fill to a new bowl
Toilet repair covers a running fill valve, a worn flapper, and a loose bowl. Toilet installation includes setting a new toilet on a sound flange, a new wax ring, and supply line, then testing the flush and the floor around the base. We will not hide a soft floor with a new bowl. If the flange is broken, we repair that first.
Sink installation and shower valve work
Sink installation includes the faucet, the drain, and the supply lines, with a check for leaks in the cabinet after the water is back on. Shower valve replacement is a more careful opening because of tile and the mixing body in the wall. We test shutoff and temperature before we close anything up.
Keep the fixture, swap it, or repair the pipe instead
We repair the fixture when a part will restore a tight shutoff. We replace it when the body is worn out or parts are no longer made. We fix the line instead when the drip is coming from a stop, a supply tube, or a drain, not from the fixture you can see. That last case is easy to miss if someone only looks at the handle.
If you already have a wet cabinet and the water is still moving, call (830) 354-6610 before you keep using the sink. When the fixture work is done, the plumber can often add a disposal check or a quick look at a slow drain in the same room. Those jobs are described on the garbage disposal repair and drain cleaning pages.
Faucet and toilet installation cost in New Braunfels
Fixture prices in New Braunfels vary with the faucet or toilet you choose and with the condition of the shutoff, flange, or supply line behind it.
| Service | Typical cost in New Braunfels |
|---|---|
| Faucet repair | $125 to $300 |
| Faucet replacement | $150 to $400 |
| Toilet repair | $125 to $350 |
| Toilet installation | $250 to $700 |
| Shower valve or cartridge work | $200 to $600 |
These figures are typical ranges for New Braunfels and the Hill Country area, not a final bill. The final price depends on the problem, the parts, how hard the work is to reach, and whether the call is after hours. We diagnose on site and give you the number before any repair starts.
Compare these figures with the full list on our plumbing cost in New Braunfels page, or call (830) 354-6610.
How much does it cost to install a new toilet in New Braunfels?
Toilet installation typically runs $250 to $700 in New Braunfels, depending on the toilet model, whether the flange needs repair, and if new supply lines are required. Final price depends on what we find once the old toilet is removed. We confirm the number before starting work.
Can a bad fixture cause low water pressure?
Yes. A clogged aerator, a failing cartridge, or mineral buildup inside an old valve can all restrict flow and feel like a pressure problem. New Braunfels hard water speeds up this buildup. We check the fixture first before assuming the issue is in the supply line or the main.
How long does faucet or toilet installation take?
Most faucet installations take under an hour once the old fixture is out. Toilet installation usually takes 1 to 2 hours, longer if the flange is broken or the floor needs attention. Shower valve work takes longer because of the wall and tile involved.
Do I need to replace shutoff valves when installing a new fixture?
Often yes, especially in older New Braunfels homes where stops have been in place for decades and can seize or crack when turned. We test every stop before relying on it. If it will not hold or shut fully, we replace it as part of the same visit so the new fixture does not leak later.
Questions about faucets, toilets, and fixture installation
Can you repair a dripping faucet, or does the whole faucet have to come out?
Many dripping faucets are a worn cartridge, a failed seat, or a loose handle, and those we can repair without replacing the whole faucet. We replace the faucet when the body is pitted, the finish is failed and parts are no longer made, or the valve no longer shuts after a cartridge swap. Mineral film on New Braunfels aerators can also look like a drip until we unscrew the tip and check the valve itself.
My toilet keeps running. Is that a simple flapper?
A running toilet is often a flapper that has warped, a fill valve that never quite closes, or a chain that is too tight. Those are toilet repair jobs we can usually finish on the first visit. If the bowl rocks, the wax ring may be leaking at the floor, and that is a different repair. A new handle will not fix a cracked tank or a worn flush valve seat.
Do you install a new sink or toilet in an older New Braunfels cottage?
Yes. Sink installation and toilet installation are part of this work when the stops, the drain, and the floor flange are sound. In an older cottage we check those connections first, because a new fixture will leak if the shutoff is seized or the flange is broken. We also reset a toilet that rocks, and we will not set a new bowl on a rotten floor without telling you what the floor needs.
Why does my shower valve no longer shut off cleanly?
A shower valve that drips or slams from hot to cold is often a worn cartridge, and scale makes that wear show up sooner. We can do shower valve replacement in the wall when the body is still good, or we can set a new valve when the body is damaged. Tile work around the valve stays as tight as the opening allows. We test temperature and shutoff before we close the wall.
Should I shut the water off if a supply line under the sink is spraying?
Yes, close the stop under the sink if it will turn, or close the house valve if it will not. A spraying supply line is closer to a pipe problem than a fixture problem, and we will repair or replace that section as part of the visit when we can. If the water is spreading across the floor, treat it as an emergency call rather than waiting on a faucet appointment.
For fixture installation or fixture repair in New Braunfels, call (830) 354-6610 and tell us which tap, toilet, or shower is failing. Contact the shop if you want the address on one page. About our visits and the broader plumbing services list are close by. Fixture questions also sit on the FAQ page.
Service ZIPs: 78130, 78132
Plumbing Problem? Call New Braunfels Plumbing Solutions Today
